SATEL
INT-SZ
7
Auto
– on for about 40 seconds after pressing any key. Additionally, it can be turned on if
a specific event occurs (see the “Auto-backlight”
parameter).
Permanent
– always on.
Auto-backlight
– if the keys backlight comes on automatically, you can additionally define
whether and what event will turn the backlight on:
No
– the keys backlight will not be additionally turned on.
Zone violation
– the keys backlight will additionally go on if a selected zone is violated.
Entry delay, part.
– the keys backlight will additionally go on if entry delay countdown
starts in the selected partition.
Unlock door if fire
[Doors on fire] – you can define whether and when the fire alarm will
unlock the door controlled by the code lock (i.e. will activate the relay output):
No
[no open] – the door will not be unlocked in the event of fire alarm.
Part. fire alarm
[on partit. fire] – the door will be unlocked in the event of fire alarm in the
partition to which the code lock belongs.
Object fire alarm
[on object fire] – the door will be unlocked in the event of fire alarm in
the object to which the code lock belongs.
Fire alarm
[on any fire] – the door will be unlocked in the event of fire alarm in the alarm
system.
4. Using
4.1 LED indicators
LED
Color
Description
green
ON
– code lock is operated by the control panel
red
ON
– access granted – door unlocked
yellow
flashing
– door open
All LEDs flashing in turn indicate that there is no communication with the control panel.
4.2 Sound signaling
4.2.1 Beeps generated when operating
The installer can disable the sound signaling or replace it with flashing of the keys
backlight (see “Configuring”).
1 short beep
– any number key is pressed or the code is used.
4 short and 1 long beeps
– confirmation of door unlocking or execution of another function.
3 pairs of short beeps
– code change is required.
2 long beeps
– unknown code.
3 long beeps
– unavailable function.
4.2.2 Signaling events
The installer defines whether events are to be signaled audibly (see “Configuring”).
