SATAM ZCM17, Описание, эксплуатация, установка и техническое обслуживание

Страница: 17 / 19

02/2018 Edition
17/19 U518156 ‐ en ‐ REV0
Trolley version (option)
Trolley
Calibration device mounted on chassis with 4 pivoting wheels
Connecting pipes between meter and hoses 2, Steel
Flexible hoses / Connections
3mL / Loose type flanges ASA 150lbs, TODO type couplings, CAMLOCK type couplings
Model Nominal size
ZCM17-24 DN50 / 2’’
ZCM17-48 DN50 / 2’’
ZCM17 - 80 DN80 / 3’’
ZCM17-150 DN100 / 4’’
ZCM17-250 DN150 / 6’’
ZCM17-330 DN200 / 8’’
Isolating valve Ball valve located downstream the meter (option)
Drainage equipment Manual drainage pump with purge valve, hoses and 2 release valves
Accessories
Temperature measurement
Local display (option)
Pressure measurement Local display
Environmental
Ambient working temperature
min / max -25°C, -40°C (option) / +55°C -13°F, -40°F (option) / +131°F
Storage temperature min / max -40°C / +80°C -40°F / +176°F
Certification
ATEX
Zone 1 II 2 G
B. Technical data: ZCM with electronic register
Performance characteristics
Measured liquids
Liquid hydrocarbons, industrial oil, fatty acid esters, ethanol
Static pressure max 15 bar
Inlet pressure max 10 bar
Liquid temperature min / max - 10°C / +90°C 14°F / +194°F
Working flow rate min / max
Model m3/h L/mn USGPM
ZCM17-24 2;4 / 24 40 / 400 10.5 / 105
ZCM17-48 4.8 / 48 80 / 800 21 / 210
ZCM17 - 80 8 / 80 133 / 1333 36 / 360
ZCM17-150 15 / 150 250 / 2500 66 / 660
ZCM17-250 25 / 250 416 / 4166 110 / 1100
ZCM17-330 33 / 330 550 / 5500 145 / 1453
Liquid viscosity max 20 mm²/s (MID) - 800 mm²/s - at operating conditions
Accuracy / Repeatability < 0.1% of measured value / < 0.02% of measured value
Calibration report According to OIML R117-1 / One calibration report per operating viscosity
Calibration at 7 flowrates with 2 repetitions per flow rate
Flowmeter manifold
Connection nominal size
Model Nominal size
ZCM17-24 DN50 / 2’’
ZCM17-48 DN50 / 2’’
ZCM17 - 80 DN80 / 3’’
ZCM17-150 DN100 / 4’’
ZCM17-250 DN150 / 6’’
ZCM17-330 DN200 / 8’’
End connection style Flanges ASA 150 RF
Coating Acrylic-Epoxy coating RAL5010, Marine Epoxy coating RAL5010 (option)
Flowmeter body
Body material
Ductile iron (EN 5.3201) , Ni resist iron (EN-JL3011) (option)
Cap/end cover material Carbon steel (EN 1.0625) with protective coating
Seal/O-ring material Viton, Nitrile (option for alcohols measurement)
External coating Acrylic-Epoxy coating RAL5010, Marine Epoxy coating RAL5010 (option)