22
SAS 1SF - Twin Screw Feeder Assy & Control - APRIL 2020
KEY COMPONENT REPLACEMENT
GEAR REDUCER REPLACEMENT
To replace the gear reducer perform the following actions:
1. Loosen the central fastening screw (Fig. 7.4.1.A)
2. Loosen the shaft screws of the gear reducer from the housing (Fig. 7.4.1.A)
3. Take the gear reducer off and replace it with the new one.
Follow the procedure in reverse order to assemble the new gear reducer
1. Screw in the shaft screws of the gear reducer in the housing (Fig. 7.4.1.A)
2. Locate and screw in the fastening screw (Fig. 7.4.1.A)
