18
SAS 1SF - Twin Screw Feeder Assy & Control - APRIL 2020
SERVICING OVERVIEW
•
Before beginning the maintenance operations clean the working area and take
away all the objects that can be dangerous.
•
Light adequately the working area with portable safety lamps.
•
The maintenance technicians have to be adequately trained and well skilled
about the maintenance process.
•
The machine user is responsible for the training level of the maintenance
technicians according to the requirements of this manual.
•
Wear the suitable protection devices for the operations that have to be
performed. The clothes must be tight to the body and resistant to the cleaning
products. Avoid wearing ties, necklaces, belts or anything else that can entangle
into the moving parts of the machine.
•
Operators under alcohol or drugs effects cannot be authorized to use the
machine or to perform any maintenance operation.
•
Every maintenance or repairing operation must be carried out by trained
operators or personnel that have the necessary physical and intellective
requirements.
•
Maintenance and repairing operations must be carried out under the supervision
of only one person.
•
At the end of the maintenance/repairing operations the machine must be started
up only after the OK of the supervisor who has to check that:
o
the work has been performed correctly.
o
the machine works perfectly.
o
the safety systems are working.
o
nobody is working on the machine.
•
The manufacturer is not responsible if the maintenance is not performed
following the directions on this manual. The manufacturer is not responsible for
any damage to people/things that come from a wrong or incomplete
maintenance.
•
If the user requires it the manufacturer can provide qualified personnel for the
machine maintenance according to the current conditions.
•
Before starting the machine, make sure that there are not any external things
(keys, screw, screwdrivers etc.) on the machine and that the adjusted or
replaced parts are firmly fixed.
•
Check that on the floor there is no oil, grease or anything else that can make
operators fall or slip in the working area.
•
If there is more than one operator working on the maintenance ,it is necessary to
warn them all before turning on the machine.
WARNING
:
Do not move by hands the mechanic parts of the machine. If the
Power is on, there can be dangerous movements for the operator safety.
