19
SAS 1SF - Twin Screw Feeder Assy & Control - APRIL 2020
SERVICING OVERVIEW
It is absolutely forbidden to work inside the feeder while it is functioning.
It is absolutely forbidden to open the inlet and outlet ports and the covers with the
general power switch of the machine in “I” closed position.
WARNING:
It is absolutely forbidden to take off the safety guards during the
equipment functioning.
Remove the safety guards only after switching off the power supply.
This operation is allowed only to technical qualified personnel.
WARNING
:
it is compulsory to isolate any energy supply of the line anytime the
maintenance and adjusting operations are performed.
It is absolutely forbidden to work inside the feeder while it is functioning.
It is absolutely forbidden to open the inlet and outlet ports and the covers with the
electrical power On.
WARNING:
It is absolutely forbidden to take off the safety guards during the
equipment functioning.
Remove the safety guards only after switching off the power supply.
This operation is allowed only to technical qualified personnel.
WARNING:
it is compulsory to isolate any energy supply of the line anytime the
maintenance and adjusting operations are performed.
Before starting the equipment, by turning the main switch on the ON position, it is
necessary to:
Nobody is nearby the equipment.
•
The safety devices are present and functioning.
•
The safety guards are completely closed.
Every operation has its own potential risks and dangers. Before starting any operation
carefully read the manual.
The above mentioned maintenance operations have to be performed by qualified
personnel.
To assure a perfect functioning of the machine it is necessary to perform a
general check every 24 hours.
