Sartorius VIS1X, Руководство по эксплуатации

Страница: 35 / 78

VIS1X Operating Instructions 35
System Settings
t
Select the unit (1) to be used to display the weighing result.
t
Select the display accuracy (2) to be used to display the weighing result.
t
Select
l
to confirm.
y
The weighing display appears with the changed settings.
This setting remains until the selection is changed.
Conversion Factors for Weight Units
The table contains common weight units and their conversion factors in relation
to the gram. The scale can work in the following units as and when needed (with
verified scales, this is only possible if the country’s laws regarding legal metrology
and verification permit this):
Unit Factor Display
Grams 1.00000000000 g
Parts per pound 1.12876677120 p
Some weight units and accuracy settings may be blocked from use in
verified scales, depending on national laws regarding legal metrology
and verification.
Depending on the country-specific model version, not all weight units
listed may be available.
7.4 Resetting the Scale
t
Select the [Setup] button in the Sartorius menu.
y
The [Settings] window opens.
t
Select [More settings].
t
Select [Reset settings].
1 2
Unit / Accuracy
g
p
All digits on
PolyRange
Settings
Calibration/Adjustment
Weighing
Ethernet
Display brightness
More settings
More settings
Menu access
Set password
Reset settings
Enable upload mode
Enable service mode