Sartorius MA35, Руководство по эксплуатации

Страница: 6 / 45

6
!
Clean your moisture analyzer only
according to the cleaning instructions
(see “Care and Maintenance”) .
Do not open the analyzer housing .
$
Please contact your local Sartorius
Service should any problems arise with
your device .
Warning: Severe Burns!
– When setting up the moisture analyzer,
leave enough space to prevent heat
from building up and to keep your ana-
lyzer from overheating:
– leave 20 cm (about 8 inches) around
the moisture analyzer
– leave 1 m (3 ft .) above the moisture
analyzer
– Do not place any flammable substances
on, under or near the moisture analyz-
er, because the area around the heating
unit will heat up
– Be careful when removing a sample
from the chamber: the sample, the
heating unit and the sample pan may
still be extremely hot
– Prevent excess heat build-up around
the analyzer
Hazards for persons or equipment
posed by certain sample materials:
Fire Explosion
– Flammable or explosive substances
– Substances that contain solvents
– Substances that release flammable or
explosive gases or vapors during the dry-
ing process
In some cases, it is possible to operate
the moisture analyzer in an enclosed
nitrogen atmosphere to prevent the
vapor released during drying from
coming into contact with oxygen in the
surrounding atmosphere . Check on a
case-to-case basis whether this method
can be used, because installation of the
analyzer in too small an enclosed space
can affect its functioning (for instance,
through excessive heat build-up within
the analyzer) . When in doubt, perform
a risk analysis .
The user shall be liable and responsible
for any damage that arises in connection
with this moisture analyzer .