48
●
Turn on the balance:
Press
e
> All display segments light up
briefly
●
Select the over/under
checkweighing application in the
Setup menu: Press
M
●
Select menu:
Press the
menu
soft key (
w
)
●
Set parameter
2 1 8
:
See “Configuring the Balance”
●
Exit the Setup menu:
Press
M
Setting Parameters for the Over/
Under Checkweighing Application
k
Access the Setup menu:
Select
Menu
●
Set parameters for:
– Automatic initialization when
balance switched on:
3 10
auto-start app.
– Automatic printout when
weight value is within limits
and balance at stability:
4 2
auto print +/-
– Control lines on:
4 3
+/- ctrl ports on
Automatic output of
initialization values to
interface port:
7 1
Print app. param.
– Signal direction for data output
port lines:
8 8 1
input
or
8 8 2
output
See “Configuring the Balance”
●
Exit the Setup menu:
Press
M
Additional Functions
In addition to functions for:
– alphanumeric input
(not during initialization),
– taring
(not during alphanumeric input),
– printing,
you can also access the following
functions from this application:
– calibration
(not during alphanumeric input
or during initialization),
– setup (not during initialization),
– turning off the balance.
Calibration/Adjustment
●
Press
q
> See “Calibration/Adjustment”
for further instructions
Setup (setting parameters)
●
Press
M
> See “Configuring the Balance”
for further instructions
Turning Off the Balance
●
Press
e
> The balance shuts off
> The display goes blank
Содержание LP Models
