HITCH TITE INSERTION
SECURE RACK TO VEHICLE
Insert receiver tube into hitch.
Insert Hitch Tite
TM
Bolt through washer and into hitch.
2
3
MOUNT THE RECEIVER
2
Vehicle hitch
3
4
Tighten Hitch Tite
TM
bolt with 3/4” wrench.
Insert cotter pin through hole to secure. Note: Cotter pin can be
replaced with a 3/16” shakle padlock for additional security.
4
5
5
BALL MOUNT ONLY!
FOR BALL TYPE HITCH:
Secure tilt bracket to hitch following Fig. 1a. Note:
Depending on the bumper, it may be necessary to add spacers (not included) for nut
to be accessible with a wrench (Fig. 1b).
Receiver Tube
Hitch pin can
be replaced
with a 3/16”
shakle pad-
lock
Vehicle Hitch
For 2” Hitch
RECEIVER
VEHICLE HITCH
For 1-1/4” Hitch
1a
1b
Assemble HitchTite as shown above for 2” hitch.
Assemble HitchTite as shown above for 1-1/4” hitch.
