MOUNT TILT BRACKET
MOUNT TILT BRACKET
Insert 2.5” Carriage Bolt (short one) into square hole in tilt bracket
and through receiver tube.
Insert clevis pin through hole in tilt bracket and through receiver
tube.
Secure clevis pin by inserting cotter pin through hole.
6
7
8
8
7
7
9
7
5
Secure bolt with washer then nylock nut.
Note: DO NOT TIGHTEN until completely assembled.
Insert Base Tube into tilt bracket.
9
10
7
11
10
7
Insert 3.5” Carriage Bolt (longest bolt) into square hole in tilt
bracket and Base tube.
11
7
12
Insert 2.5” Carriage Bolt (short one) into square hole in tilt
bracket.
Insert 2.5” Carriage Bolt (short one) into square hole in tilt bracket.
Secure bolt with washer then nylock nut.
Note: DO NOT TIGHTEN until completely assembled.
12
13
14
7
8
7
8
11
10
7
Secure bolt with washer then nylock nut.
Note: DO NOT TIGHTEN until completely assembled.
15
11
10
7
Secure bolt with washer then nylock nut.
Now TIGHTEN ALL nuts with wrench.
Hitch Pin(9)
Short Bolts (8)
Long Bolt (12)
Final Assembly
Be sure all bolts and pins are secured.
Tighten nuts with wrench.
16
11
10
7
