40
Saratoga Spa
®
OWNER'S MANUAL
Light control button - ambiance Lighting System*
The Ambiance Lighting System light is designed to give the user multiple color options and
styles . To turn on the system, press the light button . The spa will illuminate with one of it's
many combinations and locations . As you continue to press the light button, different color
combinations and illuminating styles, such as solid, fading or pulsating color will function .
You must press the light button through each function before it reaches the off mode . If the
light is left on it will automatically be turned off by the control system after four hours of
continuous operation .
*note:
Standard on XL only
optional Luxury Splash™ Lighting
is used in conjunction with the Ambiance Lighting
System and increases the illumination locations . It follows the same operational instructions
listed above .
optional Luxury Sound System
See operational features and directions located in the tuner and/or MP3 box, or contact your
dealer for instructions .
hEatIng ModES
Mode is changed by pressing the Warm or Cool button, then pressing the Mode button . The
heating modes "do not" control the circulation pump . It only controls the way the spas will heat
and during what time of day .
Standard Mode
is programmed to maintain the desired temperature continuously,
thermostatically on a daily basis . Note that the last measured spa temperature displayed is
current only when the pump has been running for at least 2 minutes . "Std" will be displayed
momentarily when you switch into Standard Mode .
Economy Mode
heats the spa to the set temperature only during your chosen economy
mode cycles, as needed . "Ecn" will display solid when temperature is not current, and will
alternate with temperature when temperature is current . You can choose 2, 4, 6 or 8 hours of
heat option during a 12 hour time frame . If you choose 2 hours on then the heat option will be
off for 10 hours . Then on for 2, then off for 10, and so on . This is not a filtration cycle but a
time frame you choose to allow the spa to heat if needed .
Sleep Mode
heats the spa within 20°F/10°C of the set temperature only during filter cycles.
"SLP" will display solid when temperature is not current, and will alternate with temperature
when temperature is current . This cycle is designed when the spa will not be used for long
periods of time . Water sanitizing and balance will still be necessary even if the spa is not being
used .
note:
The last measured spa temperature displayed is current only when the pump has been
running for at least 2 minutes .
FILtEr cYcLE ModES
Saratoga Spa® has designed its continuous circulation pump system to operate without manual
programming . The continuous circulation pump operates unless interrupted by a system
diagnostic or automated program, or by a power failure . With the continuous circulation system,
manual filter cycles do not apply . The spa is designed to continuously circulate the water .