39
Saratoga Spa
®
OWNER'S MANUAL
opEratIng thE hYdro puMpS
Jets 1 button
Activates the hydro jet pump #1 for maximum hydrotherapy jet action . Press the Jets 1
button once for low speed, again for high speed and again to turn the pump off . When the
pump is activated the indicator above the Jets 1 button will light up . The pump will turn off
automatically after 15 minutes on high speed and 4 hours on low speed .
Jets 2 button
Activates the hydro jet pump #2 for maximum hydrotherapy jet action . Press the Jets 2 button
once for high speed and again to turn the pump off . When the pump is activated the indicator
above the Jets 2 button will light up . The pump will turn off automatically after 15 minutes on
high speed .
Jets 3 button
(Empire, Lincoln, and Broadway XL Models Only)
Activates the hydro jet pump #3 for maximum hydrotherapy jet action . Press the Jets 3 button
once for high speed and again to turn the pump off . When the pump is activated the indicator
above the Jets 3 button will light up . The pump will turn off automatically after 15 minutes on
high speed .
note:
The spa light will begin flashing 15 seconds before the pumps shut off as a reminder, that
the pump(s) cycle is about to end.
note:
The Adelphi model only has 1 jet button on the panel .
note:
Saratoga Spas® models are designed for maximum heat retention . The unit is
not designed to cool water . If the set or desired temperature is below that of the ambient
temperature, the unit will not be able to achieve this demand . Depending on the desired
temperature, it may be necessary to add cool water to the unit to lower your spas water
temperature .