26
Setting Camera Performance <CAMERA>
A
Adjusting Automatic Setting (AUTO)
1
Select <LEVEL> and specify a level for
DAY/NIGHT switching.
2
Set <BURST> to “ON” or “OFF” for the burst
signal*.
3
Select <MENU> – “BACK” and press the SET
button.
R
Returns to the camera performance screen.
• If you want to close the settings screen, set to “END” and press
the SET button.
LOW
: Switches in darker conditions.
HIGH
: Switches in brighter conditions.
ON
: Burst signal inserted into the Black-and-White image.
• Inserting the burst signal prevents the image distortion that may
occur when switching from Color to Black-and-White.
OFF
: Burst signal not inserted into the Black-and-White image.
DAY/NIGHT SETTING
·LEVEL
BURST
LOW
OFF
·LEVEL
B/W
B/W
Color
Color
B/W
Color
B/W
B/W
Color
Color
B/W
Color
LOW
HIGH
DAY/NIGHT SETTING
LEVEL
·BURST
LOW
OFF
·BURST
Note:
• If an infrared lighting system is used, the B/W mode may switch
to COLOR when a subject reflects the light intensely. Place the
unit out of the infrared lighted area.
• When <MOTION> is “ON” (see page 38), the motion sensor
detection will be interrupted during switching over from B/W to
COLOR mode and from COLOR to B/W mode.
* The burst signals are color synchronization signals required for
reproducing color.
L5BL2_BM2_US_XE(GB).book 26 ページ ２００６年６月１４日 水曜日 午後１２時５６分
