11
Getting Star
ted
Naming Cameras <OPTION> – <TITLE>
3
Repeat step
2
to complete the name.
• You can enter up to 16 characters.
Example: ROOM1
R
The letters “???....” do not appear on the monitor screen, but if
you select “ON” for the <TITLE> and then enter no letter at all,
the monitor will show you “???....”.
■
If you want the name to be displayed on the monitor in two lines
Select <ID> and enter the line feed mark (
v
) in the “ID string” wherever you
want to start a new line.
4
Select <POSITION> and press the SET button.
R
On the normal monitoring screen, the name will be displayed.
5
Determine the location where the name should
be displayed, and then press the SET button.
R
Returns to the settings screen.
6
Set <MENU> to “END” and press the SET button.
R
Closes the settings screen and displays the name on the
normal monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
■
To delete the name specified
Set <PRESET> to “ON”, and press the SET button.
R
All the characters in the “ID string” will be displayed with “?”.
TITLE SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-v
·
ID ROOM1???????????
x
ID ROOM1???????????
x
·POSITION
PRESET
MENU
SET y
OFF
BACK
·POSITION
SET
R
MEMO:
• If an alarm signal is input when <ALARM SIGN> is “ON” (see
page 41), the camera name on the screen will blink during the
time set in <DURATION> (see page 40). When the camera name
is not specified, “???....” will blink.
If <MOTION> is “ON” (see page 38), the camera name on the
screen will also blink when the motion sensor detects movement.
• When <PRIVACY MASK> is “ON” (see page 42), the camera
name will not be displayed.
ROOM1
SET
R
L5BL2_BM2_US_XE(GB).book 11 ページ ２００６年６月１４日 水曜日 午後１２時５６分
