19
Setting Camera Performance <CAMERA>
A
One-Push Adjustment (AWC)
1
Select <AWC LOCK>.
2
Point a camera to a white paper or wall to project
an image on the whole screen, and press the SET
button.
R
The cursor “
q
” lights off, and white balance adjustment will
start. The adjustment will end after about 2 seconds when “
q
”
lights again.
• If the adjustment does not yield a satisfactory result, press the
SET button again.
■
To perform fine adjustment of color
In the “AWC SETTING” screen, select <GO TO MWB> – “SET”, and
press the SET button.
R
The “MWB SETTING” screen appears. Specify values manually
(see next page).
3
Select <MENU> – “BACK” and press the SET
button.
R
Returns to the camera performance screen.
• If you want to close the settings screen, set to “END” and press
the SET button.
AWC SETTING
·AWC LOCK
GO TO MWB
SET
SET y
·AWC LOCK
SET
White paper or wall
MEMO:
Transferring to the “MWB SETTING” screen through <GO
TO MWB>, white balance mode (see page 18) will be
changed to “MWB”.
L5BL2_BM2_US_XE(GB).book 19 ページ ２００６年６月１４日 水曜日 午後１２時５６分
