English
53
BROADCAST TRANSMISSION SETTINGS (BROADCAST WINDOW)
(User Level: ID4)
4
CLOCK SET (User Level: ID4)
If you click
, the date and time from the
computer's internal clock will be applied to all
of the DVRs. (P.34)
5
SYSTEM UPDATE
This broadcasts firmware data to all DVRs to
update their firmware.
1
Click .
The transmitted file loading box contains
three selections depending on the type of
DVR. Select the [Browse] button that
corresponds to the type of DVR.
•
Applicable models:
DSR-M800, DSR-M804, DSR-M810,
DSR-M814
2
Select the file to be transmitted and
then click [Open].
The selected filename will be displayed in
the “FILENAME” box of the “SYSTEM
UPDATE” window.
3
Click .
The firmware data will then be transmitted.
•
Only firmware files that have been
provided by SANYO can be used for
updates. No other files can be used.
Do not use any file that has not been
provided by SANYO to update the
DVR’s firmware, otherwise damage to
the DVR may result.
•
DVRs cannot be updated while
recording or playback is in progress
or while the SEARCH menu is
displayed.
•
It takes several minutes for the
update to be completed, so do not
disconnect from the network or turn
off the power for the computer or DVR
during this time.
This software transmits to registered
DVRs at intervals of 1 minute. If there is
no response from a DVR after about 3
minutes or more, the software judges
that there is some sort of problem with
the DVR and displays the remote DVR
name and an error message.
*) " #$%&'
