OI-379-12EG
12
Operation with the Remote
Control Unit
1. Operation
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
Press the setting buttons as described below and change the settings as
desired.
NOTE
STEP 1
STEP 4
STEP 5
STEP 3
STEP 2
STEP 1
Press the MODE selector button and select the desired mode.
For dehumidifying operation
→
For cooling operation
→
STEP 2
To start the air conditioner, press the ON/OFF operation
button.
STEP 3
Press the TEMP. setting buttons to change the temperature
setting to the desired temperature.
Adjustable temperature range:
30 °C max.—16 °C min.
STEP 4
Set the FAN SPEED selector button to the setting you want.
If the fan speed is set to
(Automatic), the fan speed
switches automatically, according to the difference between
the actual room temperature and the temperature setting.
STEP 5
Press the FLAP button and set the airflow direction as
desired.
(Refer to ‘‘Adjusting the Airflow Direction’’ on page 19.)
NOTE
To stop the air conditioner, press the ON/OFF operation button again.
SAP-K161~241GJA 3/4/00 16:36pm Page 12
