Sanyo POA-WL11, Руководство по эксплуатации

Страница: 57 / 332

5.4.2. Control
Various control menus are displayed in Control window.
When you select an icon, the corresponding configuration window will appear, and you can set up your
projector.
[NOTE] The control page automatically shows the necessary configuration parameters depending
on the selected input mode.
Therefore, the contents of screen display may differ slightly from the description.
Furthermore, depending on the Input source, some items may not be configurable. Refer to
the projector’s owner’s manual for more details on how to configure each item.
When the projector is in Standby mode, the configuration changes on the Control menu will
not take effect.
Input
You can select Input terminal and Input source.
Parameter Description
Input You can select which input terminal to use by checking on an appropriate
radio button.
If the pull-down menu is displayed, you can select an Input source.
[NOTE] Input terminal [WI] is the digital RGB terminal to which Wireless
Imager is connected.
Comment You can store any comments regarding the initial settings. To save the
comments you entered, click [Save] button.
[NOTE] Since configuration parameters vary depending on the projector model, the contents
mentioned above may be different from the actual configuration. For details, refer to
Owner’s Manual of each projector.
Chapter 5. Operating the WI Client
— 57 —
English