Sanyo POA-WL11, Руководство по эксплуатации

Страница: 52 / 332

[NOTE] If the user password is set as described in [4.3.6. Advanced setup - User password] in
Chapter 4, it is necessary to input the password in the [Password] field on the “Connect to
Wireless Imager Host“ screen. If incorrect user password is input or password is not
input, the user password entry screen remains. Input the correct user password (The
input user password is shown like “******”.).
5. Options
When selecting [Options….], you may set up the options of the image to be transferred
corresponding to its purpose.
[NOTE] (With Windows XP only) Compared to setting PC’s display setting to 16 bit, the transfer rate
may slow down, if the Options are set to following,
(Options setting in WI Client)
Image Type: Presentation
Display Color: 16 bit
(Display setting for PC)
Colors: 24 bit or 32 bit
In this case, change the color setting for the PC monitor to 16 bit.
(A) Select a desired image type, Presentation mode or Photo mode.
●
Presentation mode
You may select [Presentation Mode] if you wish to display characters and/or graphs, etc. When
selecting [Presentation Mode], the display color is selected from either [16 bit] or [24 bit].
●
Photo mode
You may select [Photo Mode] if you wish to display natural pictures, such as photos displayed
on the personal computer. When selecting [Photo Mode], the display color is fixed at [24 bit]
and [16 bit] cannot be selected.
Chapter 5. Operating the WI Client
— 52 —