Sanyo POA-WL11, Руководство по эксплуатации

Страница: 50 / 332

[NOTE] If the user password is set as described in [4.3.6. Advanced setup - User password] in
Chapter 4, it is necessary to input the password in the [Password] field on the “Connect to
WI Host“ screen. If incorrect user password is input or password is not input, the user
password entry screen remains. Input the correct user password. (The input user
password is shown like “******”)
5.3. WI Client Menu
When right-clicking the icon in the system tray, the menu of the WI Client will be shown.
1. Real Time Capture
When [Real Time Capture] is selected, the personal computer is then connected to Wireless
Imager marked in the “Connect to WI Host” dialog box at any time.
In the real time capture, every time the screen displayed on the personal computer is changed, the
changed screen is captured, and then transferred to Wireless Imager.
The icon in the system tray is changed to the connecting icon while the screen data is being
transferred at real-time.
[NOTE] If you are using WI Client with Windows XP, and the password protection is enabled for
the screen saver, the Real-Time Capture stops, as soon as the screen saver starts.
However, when you log back on with your password and out of screen saver mode, the
Real-Time Capture mode will start again.
Disable the password protection if necessary.
▼
Chapter 5. Operating the WI Client
— 50 —
Right-clicking the icon in
the system tray
Disconnected Connected