Sanyo PLV-HD10, Руководство по обслуживанию

Страница: 68 / 178

-68-
Factory default
Press POINT UP/DOWN button to move a red frame pointer
to “Factory default” and then press SELECT button. The
message "Return to Factory default?" is displayed. Move the
pointer to [Yes] and then press SELECT button.
Another confirmation dialog box appears and select [Yes] and
then press SELECT button. Return the projector to Factory
default.
This function returns all setting values except for the lamp
counter to the factory default settings.
Closes SETTING MENU.
Quit
R/Pr G/Y B/Pb H/HV V
CONTROL PORT
DVI
INPUT 1
R/C JACK
USB
RESET
(MONO)
(MONO)
(MONO)
CONTROL PORT
INPUT 2
INPUT 3
INPUT 4
AUDIO
AUDIO
SERIAL PORT IN
SERIAL PORT OUT
AUDIO OUT
R L
R
L
R
L
SDI IN1 SDI IN2 SDI OUT
HD&SD-SDI
This projector uses a micro processor to control unit.
Occasionally, micro processor may malfunction and
need to be reset. This can be done by pressing RESET
button with a pen, which will shut down and restart unit.
Do not use RESET function excessively.
RESET BUTTON
CPU reset
Setting values
reset
Troubleshooting
●
CPU Reset Operation