PLC-XW200/250 Expand Serial Command Functional Specifications
23 / 64
8.6.3
CF_INPUT1 Command
Command “CF_INPUT1_%1_”[CR]
%1
“ANALOG” ---------- Select Analog RGB Input
“YPBPR” ------------ Select Component
“S
−
VIDEO” -------- Select S-Video Input
“SCART” ------------- Select SCART
Details
Select Computer 1 input and source specified by %1 at the same time.
This command is available in normal Power ON status.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
8.6.4
CF_INPUT2 Command
Command “CF_INPUT2_%1_”[CR]
%1
“ANALOG” ---------- Select Analog RGB Input
Details
Select Computer 2 input and source specified by %1 at the same time.
This command is available in normal Power ON status.
Projector returns “101” by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
8.6.5
CF_INPUT3 Command
Command “CF_INPUT3_%1_”[CR]
%1
“VIDEO” ----------------- Select Composite video Input
Details
Select Videoinput. This command is available in normal Power ON status.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
8.6.6
CF_INPUT_%1_%2 Command
Command “CF_INPUT_%1_%2”[CR]
%1
“COMPUTER1” ------ Select Computer1 Input
“COMPUTER2” ------ Select Computer2 Input
“VIDEO” ---------------- Select Analog Input
“S-VIDEO” ------------- Select S-video Input
%2
When %1 is COMPUTER1
“ANALOG” ----------Select Analog RGB Input
“YPBPR” ------------- Select Component
“S-VIDEO” ---------- Select S-Video Input
“SCART” ------------- Select SCART
When %1 is COMPUTER2
“ANALOG” ---------- Select Analog RGB Input
When %1 is VIDEO
“VIDEO” ------------ Select Video Input
Details
Select Input specified by %1 and also Source specified by %2 at once
This command is available in normal Power ON status.
Projector returns “101” by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
