No sound.
52
Problem:
Check Ceiling feature.
(See "OTHER FUNCTION SETTING" section on pages 46 ~ 47).
Picture is L/R Reversed.
Check Ceiling/Rear feature.
(See "OTHER FUNCTION SETTING" section on pages 46 ~ 47).
Picture is T/B inverted.
Check Display feature.
(See "OTHER FUNCTION SETTING" section on pages 46 ~ 47).
Some displays are not seen
during the operation.
●
Check audio cable connection from audio input source.
●
Adjust audio source.
●
Press the VOLUME (+) button.
●
Press the MUTE button.
Remote control unit does not
work.
●
Check the cable connection between the projector and the computer.
●
Check the mouse setting on your computer.
●
Turn on the projector before you turn on the computer.
Wireless mouse function
does not work.
Try these Solutions:
APPENDIX
●
Check the batteries.
●
Make sure nothing is blocking between the remote control sensor and
remote control unit.
●
Make sure you are not too far from the projector when using the remote
control unit. (Maximum operate range 5 m).
●
Check the ALL-OFF switch on the Remote Control Unit is set to "ON".
●
Check the transmitted signal mode from the remote control unit.
(See "OTHER FUNCTION SETTING" section on pages 46 ~ 47).
