PLV-HD2000 Basic Serial Command Functional Specifications
22/24
8. Command
with
Address
Specification
8.1 Overview
・
Commands with address are used to remotely control more than one projector through RS-232C by a
computer.
・
The command with address is defined as a single command per line that starts with ”A” and ends with
carriage return (0x0D).
・
When a projector receives carriage return (0x0D), it starts decoding.
・
This command is represented as Basic Command or Expand Command with address such as “A001”.
(The commands are the same when controlling one projector by a computer.)
e.g. Functional Execution Command
“A001C05” [CR]
e.g. Status Read Command
“A001CR0” [CR]
・
Projectors have the function to set up its address in Service Mode.
Initial setting is “No. 001”
Possible range is “001” to “999”
・
It clears the received buffer in this case as below:
・
When receiving LF (0x0A) or EOF (0x1A).
・
When it takes more than one second to receive a single command.
(When it takes more than 1 second until receiving carriage return after the reception of
the first data.)
