Sanyo LCD-32R45F, Инструкция по эксплуатации

Страница: 16 / 36

Basic Operations
Plug the power cord into an AC power outlet.
Press the Power button. Your TV turns on.
Press again to turn off your TV. When you turn off your TV, it goes into standby mode.
Turning On/Off the Power
Selecting the Input Signal Source
1
2
Press INPUT button.
Press 6 or 5 to select the input source. Options include:
On-Screen Menu Language Selection
1
3
Press MENU .
Press 5 or 6 to select Menu Settings item, press ENTER to access.
Press
3
or
4
to select Setup menu, press
6
to access the menu .
2
5
Press EXIT to close the menu.
16
Note: If there is no signal input for a certain time, the TV will auto go to standby mode.
4
Press 5 or 6 to select Menu Language item, press 3 or 4 to select
your desired language.
Select Move
MENU
Exit
Transparency
25%
Menu Language English
Select Move
MENU
Exit
Time
Closed Caption
VGA Settings
Input Label
Restore Default
Audio Only
Parental Controls
Off
Menu Settings
Press ENTER
TV
AV2
S-Video1
Component1
Component2
HDMI1
HDMI2
HDMI3
VGA
INPUT SOURCE
AV1
S-Video2
3
Press ENTER button to confirm the selection.
!
TV — Watch the TV signal .
!
AV1 — Watch the signal from the AV 1 input terminals.
!
AV2 — Watch the signal from the AV 2 input terminals.
!
S-Video1 — Watch the signal from the S-VIDEO1 input terminal.
!
S-Video2 — Watch the signal from the S-VIDEO2 input terminal.
!
Component1 — Watch the signal from the COMPONENT 1 input terminals.
!
Component2 — Watch the signal from the COMPONENT 2 input terminals.
!
HDMI1 — Watch the signal from the HDMI 1 input jack.
!
HDMI2 — Watch the signal from the HDMI 2 input jack.
!
HDMI3 — Watch the signal from the HDMI 3 input jack.
!
VGA — Watch the signal from the VGA jack.
Note:
On the remote control five direct input source select buttons ( VIDEO/HDMI/COMP/VGA/TV ) are provided.
=
VIDEO button : Press repeatedly to cycle between AV and S-Video inputs.
=
HDMI button : Press repeatedly to cycle between HDMI inputs.
=
COMP button : Press repeatedly to cycle between Component inputs.
=
VGA button: Press to view a computer connected to your TV.
=
TV button : Press to select TV.
Setup Picture Audio Channel
Audio Channel Setup Picture
1
2
3
Warning: When the TV is in standby mode, power is still flowing into the TV. To completely disconnect power, unplug the power
cord.