Turning on your TV for the first time
15
Select
Move
MENU
Previous
Next
English
Fran ais
ç
Español
Choose your menu language
2
1
3
ENTER
Next
4
Select
Move
MENU
Previous
Next
Time
ENTER
Next
DST
Mode
Off
Auto
Time Zone
Pacific
Year
Month
2010
03
Day
Time
15
09 : 05 AM
Select
Move
MENU
Previous
Next
Home Mode
Store Mode
Choose your Picture Mode
ENTER
Next
9
Choose your TV source
Analog Channels
Digital Channels
0
0
Antenna
Cable
Cable/Satellite Box
RF CH : 0
Scan for channels
10
Running initial setup
Make sure that you have inserted the batteries in the
remote control, connected the antenna to the TV, and
connected the AC power.
Press (Power), then wait several seconds. The initial
Setup Wizard
screen opens (only the first time you
turn on your TV).
Setup Wizard
Setup Wizard
Setup Wizard
Setup Wizard
Press
6
or
5
to select the menu language you want,
then press
ENTER
. The
Time
screen opens.
Press
6
or
5
to highlight
Time Zone
, press
3
or
4
to
select your time zone.
Pacific, Alaska, Hawaii,
Atlantic, Eastern, Central, Mountain
can be
selected.
If your viewing area observes daylight savings time,
press
5
or
6
to highlight
DST
, then press
3
or
4
to
select
On
.
Press
5
or
6
to highlight
Mode
, then press
3
or
4
to
select
Manual
(to set the date/time manually), or
Auto
(the date/time are automatically set by the TV signal
source, based on the time zone you selected).
If you select
Manual
mode, make the settings as
follows:
.
Press
5
or
6
to highlight
Year, Month,
or
Day
, then
press
3
or
4
to adjust the setting.
.
Set the time by pressing
5
or
6
to highlight
Time
,
then press
3
or
4
to highlight the hour, minute, or
AM/PM field. Press
5
or
6
to adjust the setting.
5
6
7
8
After the above setting, press
ENTER
and the
Choose
your Picture Mode
screen opens.
Press
6
or
5
to select
Home Mode
(qualifies for
ENERGY STAR) or
Store Mode
(for the retail display
setup), then press
ENTER
.
If you select
Home Mode
, the
Choose your TV source
screen opens.
If you select
Store Mode
, a message stating
“Are you sure you
want Store mode? Since in this mode Energy saving is not
realized”
appears. Select
Yes
to proceed or
No
to exit.
Press
6
or
5
to select
Antenna, Cable,
or
Cable/Satellite Box
, depending on the type of
connection you have.
.
If you are using an antenna for a standard or HD TV signal,
select
Antenna
.
.
If your cable is connected directly to the TV (without a
tuner box), select
Cable
.
.
If your cable is connected to your TV through a tuner box,
select
Cable/Satellite Box
.
Press
ENTER
when you have made your selection. The
channel scan screen opens.
If you selected
Antenna
or
Cable
, your TV automatically
scans for available channels in your area and stores the
channel information in the channel list. This may take several
minutes. While scanning, the TV displays a progress report.
– OR –
If you selected
Cable/Satellite Box
, the auto scan is not
necessary and the screen will ask you to select the correct
input source for your set top box. Press
EXIT
to close the
menu.
11
Notes:
.
During auto scan, digital programs will be scanned first, then
analog programs. When all available digital programs have
been searched, the screen will ask you to “Press
MENU
or
EXIT
if you don’t need analog channel scan.” At this point you
can press
EXIT
to exit the analog channel scan, or just ignore
it and the TV will go on scanning.
.
Channel scan can take up to 30+ minutes.
You can press
EXIT
at any time to stop the auto scan, but you
will need to run the auto scan again to create a channel list.
Select the corresponding video input source through the
INPUT SOURCE
menu.
12
Select
Move
MENU
Previous
ENTER
Next
“Store mode” is for the retail display setup.
“Home mode” qualifies for ENERGY STAR,
Содержание LCD-32R45F
Страница 36: ...5944037590 Ver 1 0 PRINTED ON RECYCLED PAPER ...
