GB-39
[ENGLISH]
Symptom
Possible cause
Corrective action
The Removable Disk is not displayed when the unit is connected to the PC.
The PC and the unit are not connected correctly.
Make sure the connect is corrected.
Disconnect the unit from the PC and reconnect it again.
Sufficient power is not being supplied from the PC.
If a USB hub is being used, reconnect the unit directly to the USB port
on the PC. If the PC is equipped with several different USB ports, try
another port.
The USB driver is not installed properly.
Check the installation (only for Windows98/98SE operating systems,
see page 23).
A network drive has been assigned.
If a network drive has been assigned, the drive letter (the letters used
as drive names) is already taken, so the Removable Disk cannot be
created. Change the network drive assignments and reconnect. Talk to
your network administrator about reassigning network drives.
A file can't be erased.
The attribute of the file is set up only for reading.
Please erase a file whether connects this to a PC and changes file
attribute. Or please do format of built-in memory (initialization).
[FAT Err] is displayed and nothing else happens.
FAT administration system error.
Format (initialize).
