Sanyo DMP-P690, Инструкция по эксплуатации

Страница: 14 / 31

→
EQ1(FLAT)
→
EQ2(CLASSIC)
→
EQ3(ROCK)
→
EQ4(POP)
→
EQ5(JAZZ)
SETTING & BASIC OPERATION
Volume Controls
To increase or decrease the system volume, press the VOLUME or button on the
remote control or or - on the top panel. The Volume Level Indicator will appear
on the display when you change the volume level.
The level indicator ranges from “00” (Minimum) to “30”
(Maximum).
If the volume level is less than VOL 24, the system remembers
the volume level when the power is switched ‘off’ and
automatically returns to the same level when the power is switched ‘on’ again. If the
volume level over VOL 24, when the power is switched ‘off’ volume automatically returns to
the default level(VOL 15) when the power is switched ‘on’ again.
EQ (ELECTRONIC Preset Equalizer) (On Remote Control Only)
The preset equalizer allows you to adjust the sound
characteristic for the most popular types music.
Press the
EQ button on the remote control to cycle through
the following equalization modes:
The appropriate EQ indicator briefly appears in the display to confirm your selection.
The system remembers the EQ setting when the power is switched ‘Off’ and returns to
the same setting when the power is switched ‘On’ again.
DBBS (Dynamic Bass Boost) Control (On Remote Control only)
Press the DBBS button on the remote control to increase the bass response. Press
again to cancel the Bass Boost function.
MUTE Button (On Remote Control Only)
Press the MUTE button on the remote control to shut off the
speakers temporarily, for example, to answer the telephone.
The sound stops and the Volume Level indicator begins
flashing on the display.
Press the MUTE button again to cancel the mute function and restore the sound.
The mute function will also be cancelled automatically by pressing the VOLUME or
button on the remote control or touch the or - on the top panel.
13