TROUBLESHOOTING GUIDE
Soluti on
iPod Player
Noise or sound
distorted on FM or
AM broadcasts
Radio
Station not tuned properly
for FM or AM.
FM: Wire aerial is not
positioned correctly.
Loop aerial is not positioned
correctly.
FM station is mono or station
signal is weak.
FM STEREO indicator
does not light.
Retune FM or AM broadcast
station.
Extend FM wire aerial.
Reposition so that the best
reception is obtained.
Extend FM aerial. Try other
strong stations.
Press MODE button to select
Tuner function.
Increase Volume.
Plug the AC adaptor into a wall
outlet and plug the connector
into the DC IN jack on the unit.
AC adaptor is not plugged into a
wall outlet or the connector is not
plugged into the DC IN jack on
the back of the unit.
Using no or wrong iPod insert
iPod did not install properly
iPod is not installed properly
iPod is locked up
Using first or second generation
iPod, iPod shuffle or other
devices.
iPod is not installed properly
iPod is locked up/frozen
iPod battery has problem
Unit does not respond
(no power)
iPod does not dock
properly
iPod does not
respond to the unit
iPod did not
charge up
AM
or
FM
,
no sound.
Function
is
not
set
to
Tuner
.
Volume at minimum.
Make
sure
the
dock
insert
is
the
proper
fit for the iPod.
Remove
the
iPod
from
the
dock
and
check
for
obstruction
on
the
connections
in
the
dock
and
on
the
iPod. Then reseat it in the dock.
Remove
the
iPod
from
the
dock
and
check
for
obstruction
on
the
connections
in
the
dock
and
on
the
iPod. Then reseat it in the dock.
Please make sure your iPod is
working properly before docking
into the unit. Please refer to the
iPod manual for details.
This unit cannot control those
iPod or other devices.
Remove
the
iPod
from
the
dock
and
check
for
obstruction
on
the
connections
in
the
dock
and
on
the
iPod. Then reseat it in the dock.
Please make sure your iPod is
working properly before docking
into the unit. Please refer to the
iPod manual for details.
Remarks:
If troubleshooting(see above)does not eliminate the problem, disconnect the unit from
the mains power and re-connect after a few seconds. Resetting causes the unit to
restore its factory default setting and results in all the setting made by the user being
deleted.
27
Symptom
Possible
Cause
Содержание DMP-P690
Страница 31: ...Printed in China CODE NO 116421166 ...
