Sanyo DMP-P690, Инструкция по эксплуатации

Страница: 17 / 31

Up to 40 stations (20 AM / 20 FM) can be stored in the tuner memory for easy recall at
any time. Use either the Automatic or Manual tuning methods described on page 14
to tune to the first station to be stored in memory. (Example “FM 103.50 MHz”)
1.) When the desired station frequency appears in the
display, press and release the TIME SET / MEMORY
button on the remote control or touch TIME SET /
MEMORY on the top panel. The P – 01 (Preset Memory
#1) indicator will begin flashing in place of the radio
frequency display.
To enter your station in Preset Memory #1, press the
TIME SET / MEMORY button on the remote control or
touch TIME SET / MEMORY on the top panel again.
The P – 01 will stop flashing and remain on the display
for 5 seconds, and then the display will return to the
selected radio frequency. Your selected station has
now been entered in Preset Memory #1.
2.) Tune to the next station that you want to memorize and
when that station appears in the display press the TIME
SET / MEMORY once. The P – 01 indicator begins
flashing. Press the PRESET / MENU + or - button on
the remote control or touch the ALM1 / PRESET - or
ALM2 / PRESET + control on the top panel to select a
different preset memory number, and then press the
TIME SET / MEMORY button once more to enter your
station in the selected preset memory number.
3.) Repeat step 2, choosing a different preset memory
number each time until you have entered up to 20
stations on one band. You may then select the AM band
and follow the same procedure to preset up to 20 AM
stations in the tuner memory.
Note: You must press the TIME SET / MEMORY button while the memory indicator is
flashing in order to enter the station in memory. If the memory indicator stops flashing
the station will not be entered in the memory.
16
PRESETTING STATIONS IN THE TUNER MEMORY