11
5.
Press the MEMORY button. “Minute” section and “ON” blink.
6.
Turn the VOLUME control to set “minute” section.
7.
Press the MEMORY button. This completes the setting of the timer
ON time.
“
0
OFF” and “hour” section blinks.
8.
Repeat steps 4-7 aboves. This completes the setting of the OFF time.
Original display appears.
9.
Turning the power off. “
0
” remains display.
When the timer on-time arrives, the power is turned on automatically
and the unit starts playing with the preset function selected.
-
“
0
” blinks while timer operation is engaged.
-
When the timer off-time arrives, the power turns off and the timer is
set to the standby mode. Timer operation repeats this cycle every
day.
To check the timer setting
Turn on the power. Press the CLOCK TIMER button once, current time
appears. Then press the CLOCK TIMER button about 2 seconds. Timer
on-time appears. Press the button repeatedly, the timer setting are
displayed in the following order.
-
Timer off-time.
-
Original preset function
-
Original display returns.
To change the timer settings
1.
Press the CLOCK TIMER button to select the setting to be changed.
2.
Press the MEMORY button so that the display blinks.
3.
Change the setting as explained above.
To release the timer
Turn the power on and press the CLOCK TIMER button till “
0
” display
disappears.
To set the timer again with the same settings
1.
Turn the power on and press the CLOCK TIMER button twice till “
0
”
appears.
2.
Press the
z
/ON button to switch off the power.
Note:
The timer operation is released if a power failure occurs.
Using the sleep timer (Remote control only)
The sleep timer automatically switches off the power after a preset time
has elapsed. There are 12 time periods available: 120, 110, 100, 90, 80,
70, 60, 50, 40, 30, 20 and 10 minutes.
Example: Select the sleep time of 60 minutes.
Press the SLEEP button to choose sleep time of 60 minutes, “SLEEP”
and “60” appear, after several seconds it will return to the original display
and “SLEEP” remains display till power off.
-
To release the sleep timer, press the SLEEP button repeatedly till the
“SLEEP” disappears.
-
The sleep timer will clear automatically when power off.
Timer priorities
The sleep timer has priority over the wake-up timer. The power is switched
off by the sleep timer.
MAINTENANCE
Cleaning the tape heads (Fig. 10)
To ensure continued high performance, use cotton swab to clean the heads,
pinch rollers and capstans of the decks after about every 10 hours of use.
If the dirt persists, soak the swab in a little methylated spirit or head cleaning
fluid and then clean.
Cleaning the CD player lens
The lens should never be touched. If dust is on the lens, blow it off using
a camera lens blower (Fig. 11). (Consult your dealer.)
Cleaning the unit
Clean the outside of the unit with a clean soft cloth, moistened with
lukewarm water. Do not use benzene, thinner or alcohol since they will
mar the finish of the surfaces.
SZ000792-1450XE(En)
01/19/2006, 10:40 AM
11
