14
RESET TING THE TV
Press the
RESET
key to automatically reset the television to factory settings. These features will automatically reset:
•
Picture/Sound Adjustments: Color, Tint, Contrast, Brightness,
Sharpness, Color Enhancer, and Tone
•
Channel Memory
•
Audio to Stereo
•
Caption to OFF
•
V-Guide to OFF
•
Language to English
•
Sleep Timer (if previously set)
If desired, personal settings can be made again using the menu options.
Press RESET key
again to return
factory preset and
begin channel search
CARE AND CLEANING
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays,
cleaning agents, solvents and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
Note: NEVER spray liquids on the screen because they can run down and drip onto the
chassis. This may cause component failure not covered under Warranty.
SETTING THE SLEEP TIMER
The Sleep Timer will switch off the TV automatically.
1. Press the
SLEEP
key.
2. Use the
0
key to select the desired time
(from 30 minutes up to 3 hours).
Note: The Sleep Timer cancels when the TV is turned off
or if a power failure occurs.
Sleep
:
0:30
Use 0 key
Sleep : 1:00
Sleep : 1:30
➧
Sleep : 2:00
Sleep : 2:30
Sleep : 3:00
Sleep : Clear
CAPTION
SLEEP
1
4
7
0
8
5
2
3
6
9
RESET
VIDEO
MODE
POWER
CABLE
VCR
TV
➊
❷
●
Press POWER key.
●
Sleep Timer may have been set.
●
Unplug TV momentarily.
●
Adjust antenna.
●
Try a different channel.
●
Press RESET key.
HELPFUL HINTS - PROBLEMS / SOLUTIONS
BEFORE REQUESTING SERVICE CHECK THE FOLLOWING CHART.
TV turns off
automatically.
No picture, poor picture.
●
Check signal (Cable/Ant.) connection.
●
Power surge protection feature.
●
Check antenna connections.
●
May be station trouble.
●
Brightness or Contrast misadjusted.
●
Possible interference from household
appliance.
Problem:
Check these Conditions:
Try these Solutions:
(Continued on page 15.)
RESET TING THE TV
Press the
RESET
key to automatically reset the television to factory settings. These features will automatically reset:
•
Picture/Sound Adjustments: Color, Tint, Contrast, Brightness,
Sharpness, Color Enhancer, and Tone
•
Channel Memory
•
Audio to Stereo
•
Caption to OFF
•
V-Guide to OFF
•
Language to English
•
Sleep Timer (if previously set)
If desired, personal settings can be made again using the menu options.
Press RESET key
again to return
factory preset and
begin channel search
CARE AND CLEANING
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays,
cleaning agents, solvents and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
SETTING THE SLEEP TIMER
The Sleep Timer will switch off the TV automatically.
1. Press the
SLEEP
key.
2. Use the
0
key to select the desired time
(from 30 minutes up to 3 hours).
Note: The Sleep Timer cancels when the TV is turned off
or if a power failure occurs.
Sleep
:
0:30
Use 0 key
Sleep : 1:00
Sleep : 1:30
➧
Sleep : 2:00
Sleep : 2:30
Sleep : 3:00
Sleep : Clear
CAPTION
SLEEP
1
4
7
0
8
5
2
3
6
9
RESET
VIDEO
MODE
POWER
CABLE
VCR
TV
➊
❷
