Sanyo Denki SANUPS A11H Скачать руководство пользователя

Страница: 40 / 65

Maintenance

⑤

Pull the battery pack out.

⑥

Insert the new battery pack so that the connector faces forward.

⑦

Connect the battery connector.

⑧

Verify that Forced Bypass is set to “Inverter”.

⑨

Attach the battery cover.

⑩

Attach the front panel.

⑪

Set the backup time in the user setting. See §3.12 “Setting Battery Backup Time ”in the

User

Settings Guide

⑫

Set the battery type in the user setting. See § 3.13 “Setting Battery Type” in the

User Settings

Guide

⑬

Reset the battery information in the user setting. See §3.15 “ Resetting Battery Information” in the

User Settings Guide

⑧

Forced Bypass switch should be inverter

position.

⑥

Insert the new battery pack in

the direction of the arrow.

⑦

The connector cannot be inserted in

the wrong orientation. Check the

correct insert orientation, and push

in until you hear a click.

CAUTION

！

•

The battery connector cannot be inserted in the wrong orientation. If it does not go in,

do not try to force it. Doing so can damage the connector and result in electric shock.

•

Be careful not to get your hands caught when securing the cover.

This completes the battery exchange.

The batteries used in this product are lead type batteries which are a reusable resource. Please cooperate by

recycling when replacing or disposing of used batteries. Dispose of used batteries according to the instructions.

To dispose of used batteries, contact your nearest sales representative, an authorized industrial waste

handling company, or repack them in their original cartons and send them to your supplier. (An extra charge

is required.)

Note on the used battery

⑩

Place the front cover

over the battery cover,

and press it down.

⑨

Insert the tabs on the left and right

sides of the battery cover into the slots

and press it down until you hear a click

sound. Secure with the screws.

Содержание SANUPS A11H


































































Результаты поиска

Содержание SANUPS A11H

Отзывы:

Похожие инструкции для SANUPS A11H

Бренды по названию

Популярные бренды

Sanyo Denki SANUPS A11H, Инструкция по эксплуатации

Результаты поиска

Содержание SANUPS A11H

Отзывы:

Похожие инструкции для SANUPS A11H

Бренды по названию

Популярные бренды