SANY SY95C, Руководство по эксплуатации и обслуживанию

Страница: 95 / 166

MACHINE OPERATION
4-33 SY95C Excavator OMM
Loading the Machine
0003903
Figure 4-74
NOTE: Do not load or unload the machine without a
landing platform or ramps.
0003904
Figure 4-75
Use a landing platform or ramps when loading or
unloading the machine.
When loading the excavator with work equipment
installed, place the work equipment in the front and travel
forward. Keep the boom-arm angle between 90° and
110° (1).
0003905
Figure 4-76
When loading the excavator without equipment installed,
travel in reverse up the ramps. Maintain the ramps to no
more of an angle than 15° (2).
0002334
Figure 4-77
Use the following procedures during loading:
1. Align the centerline of the machine to the trailer
centerline.
2. Slowly drive the machine up the ramps.
3. When the machine tilts toward the trailer side, lower
the bucket close to the trailer floor. Drive slowly until
the tracks are completely on the trailer.
4. Slightly raise the bucket. Retract the arm and keep it
in a lower position. Slowly swing the upper structure
180°. Lower the dozer blade.
5. Fully curl the bucket and arm. Slowly lower the
boom.
0003968
Figure 4-78
NOTE: To avoid damage to the bucket cylinder, place a
wood block (3) between the bucket cylinder and
the trailer floor. Slowly lower the bucket cylinder
onto the wood block.
1
2
3