― 18 ―
― 17 ―
The display shows the readings.
2. Press the
PC
button.
The display shows
[PC]
to indicate PC connection is active.
3. To make the PC connection inactive, press
PC
button again.
The display turns
[PC]
off to indicate the PC connection is inactive.
4-12 Device Sorting
The meter can sort device values into PASS/FAIL based on
resistance, capacitance, or inductance. This feature is useful in
situations such as incoming inspections for mass production parts.
Note:
This function is not available in the Auto LCR mode.
Use this function in the manual LCR mode.
For details, refer to the section 5-5.
4-13 Backlight
To turn the Backlight on, press button.
To turn it off, press button again.
The Backlight is disabled automatically after the meter is inactive for
60 seconds.
4
-14 PC (Personal Computer) Interface
The instrument equips with an IR interface port at the meter back for
data communication. LCR-USB, dedicated USB communication unit
for LCR (separately available accessory), and the dedicated software
allow you to transfer real time readings to your PC and save them.
The connecting procedure is as follows.
1. Snap on LCR-USB and connect the USB plug to your PC on which
the dedicated software is running.
USB Communication unit
(LCR-USB)
USB Communication unit connection