SANUVOX - MODEL S300FX-GX
- 9
2.4 INSTALLING THE UNIT
(Continued)
TIPS TO INSTALLER
It is recommended that the filtration unit
have a devoted receptacle with 115V. It is
not recommended to connect unit with an
extension cord. If no receptacle is available
please call an electrical contractor to have one
installed.
MAKE SURE TO INSTALL
FILTER ACCORDING TO AIR
FLOW DIRECTION FOR
MAXIMUM PERFORMANCE
Check for this symbol on each filters and it is
located on the unit’s motor plate.
STEP 3:
Mount Hepa
STEP 4:
Finishing
Figure 2.3a -
Align unit into place.
Figure 2.3c -
Install unit using all supplied
fastening hardware.
Figure 2.4a -
Remove protective plastic covers
from all filters and install in their proper location.
Figure 2.4b -
Replace door and insert power cord
into the receptacle of the HEPA and the other end
into a wall outlet.
Figure 2.3b -
Unfold the ducting flairs to sandwich
the return air plenum between the ducting flair and
the filtration unit.
INSTALLATION GUIDE
Stage 1: Pre-Filter
Stage 2: HEPA Filter
S300FXSP - 120V Manual Eng.indd 9
2015-03-18 16:33
