10 -
SANUVOX - MODEL S300FX-GX
INSTALLATION GUIDE
2.5 UV LAMP INSTALLATION
STEP 1:
The UV Lamp is packaged in the filter section of the S300FX-GX. Remove the UV lamp from the packaging material. The lamp is fragile, use extreme
care. Do not touch the glass on the lamp with bare hands. Use the enclosed gloves when handling the lamp. Handle lamp from the ceramic ends.
STEP 2:
Remove the screws holding the front plate of the S300FX-GX to access the clamp assembly.
STEP 4:
Replace the front plate with the screws removed in (2) above.
STEP 3:
Position lamp inside the aluminum enclosure. Route 4-pronged end of lamp through clamp. Clamp is tightened by moving lever perpendicular to the
clamp. Connect the female plug to the lamp. The plug fits in one direction only. If the plug will not connect to the lamp, turn the plug 90 degrees.
S300FXSP - 120V Manual Eng.indd 10
2015-03-18 16:33
