4
Instruction Manual for IL COIL CLEAN & ITS VARIOUS MODELS
1-888-726-8869
www.sanuvox.com
ACCESSORIES & KITS
The following optional accessories and/or kits work great with your product (sold separately).
Interlok Switch
MSCSWC14
The interlok switch will shut down the IL Coil Clean
operation should the access door be opened.
For instruction manuals or information about your optional accessories and/or kits, please call SANUVOX at 1-888-726-8869
or visit www.sanuvox.com.
SETUP & INSTALLATION
What you will need
A knife to unpack all the components, a drill with 1/8 and 1/2 bits, an iron saw, a Phillips #2 screwdriver, a nutdriver key with
11/32 and 1/4 sockets.
CAUTION: Handle your product with care to avoid breaking parts. Make sure you have a free and safe space to unpack,
install and setup your product. Confirm you have access to the necessary power source for the product requirements (see unit
or system label). If you have any questions regarding the installation instructions, call SANUVOX at 1-888-726-8869.
What’s included
The IL Coil Clean (or MULTI-IL Coil Clean) aluminum
extrusion, a packaged UV lamp, a support rod, a
ballast box, and a basic installation kit.
The installation kit includes: a UV caution decal,
a maintenance decal, cotton gloves, hex bolts (2),
Phillips head screws (2), self-tapping screws (2),
nuts (2), lock washers (2), electrical connectors
(2), clamp assemblies (2), mounting flanges (2)
and a coupler.
Setup
While selecting the appropriate location for your IL unit(s), refer to your customized sizing and placement proposal. If you do not
have the customized proposal, call SANUVOX at 1-888-726-8869 to obtain one at no-charge.
IL Coil Clean units can be installed on the upstream or downstream side of an evaporator coil. The lamp assembly must be
field-installed inside the air handling unit (AHU), either horizontally to the side panels, or on the coil frame using the mounting
flanges, or vertically to the floor and ceiling of the AHU.
The ballast boxes are to be installed on the outside of the air central in a dry area. If humidifier is present, the ideal location for
the coil cleaner is in the air stream before the humidifier.
CAUTION: Make sure the site can be supplied with the necessary power requirements. Ensure that there is adequate
clearance for service and maintenance.
