background image

B

F

C

C

D

E

E

A

G

H

I

3

Instruction Manual for IL COIL CLEAN & ITS VARIOUS MODELS

1-888-726-8869

www.sanuvox.com

ABOUT THE PRODUCT

Congratulations on the purchase and installation of your new Sanuvox ultraviolet unit. Sanuvox UV coil cleaners are the most 

advanced  surface disinfection systems available having been proven to help reduce up to 99.99% of biological and chemical 

contaminants present on surfaces. Sanuvox systems have been tested by medical universities and Independent 3rd party 

laboratories. 

The Sanuvox IL Coil Clean unit is designed to disinfect the metal fins of industrial evaporator coils. While the IL Coil Clean unit 

assembly named IL Food Safe, is designed to disinfect the surfaces of food products. MULTI-IL Coil Clean stands out more in 

the disinfection of cooling systems and the reduction of ethylene in the air.

Sanuvox commercial products such as IL Coil Clean and its various models are specialized products: a sizing calculation must 

be prepared with your Sanuvox representative for your specific installation.

For information or recommendations on how to size your specific application, please call SANUVOX at 1-888-726-8869.

COMPONENTS

How it Works

The IL Coil Clean is an industrial evaporator coil cleaner that is installed in front of the coil of the air treatment systems. Its UV 

light continuously disinfects the coil metal fins, thus not only maintaning the HVAC performance, but also to obtain healthier air 

thanks to clean coils.

The IL Food Safe is in fact a combination of several IL Coil Clean, assembled in a metal box (created by the customer himself) 

and positioned above a conveyor belt where food products circulate. Their UV light disinfect the product surfaces.

The MULTI-IL Coil Clean is an IL Coil Clean with several sections each with different UV intensity. This is a special order product.

A.  UV Lamp

B.  Anodized Aluminum Parabolic Reflector

C.  Clamp Assemblies (2)

D.  3/4" Support Rod

E.  Mounting Flanges (2)

F.  Gaynor Plug

G.  Lamp Boot

H.  Teflon Wire Set (20 feet)

I.  Ballast Box

Содержание IL COIL CLEAN













Отзывы: