User manual SNC-670ID/W
_________________________________________________________________________________
- 24 -
2.5. Auto scan
AUTO SCAN -> START ANGLE:
Press
FOCUS +
to select a start position. Move to the desired position by using the arrows.
Confirm your choice with
FOCUS +
.
AUTO SCAN -> END ANGLE:
Press
FOCUS +
to select an end position. Move to the desired position by using the arrows.
Confirm your choice with
FOCUS +
.
AUTO SCAN -> DIRECTION:
You can choose from 2 directions:
CW: clockwise (default setting)
CCW:
counter-clockwise
AUTO SCAN SET -> ENDLESS:
The AUTO SCAN function can be used endlessly. Use the left/right arrows to make the
settings. The default setting is OFF.
AUTO SCAN -> SPEED:
Speed settings ara available from 1°/sec to 35°/sec. The default setting is 20°/sec.
AUTO SCAN -> DWELL TIME:
Use the left/right arrows to set the dwell time. It can vary from 1-30 seconds. The default
setting is 1 sec.
AUTO SCAN -> SAVE AND EXIT:
This function savest he settings and exits the auto scan menu.
AUTO SCAN -> EXIT:
Exit the menu.
AUTO SCAN SET
START ANGLE : XXX.X.XX.X
END ANGLE
: XXX.X.XX.X
DIRECTION :
CW
ENDLES :
OFF
SPEED
: 20 °/S
DWELL TIME
: 03
SAVE AND EXIT
EXIT
Default setting
