User manual SNC-670ID/W
_________________________________________________________________________________
- 20 -
DOME-SETUP -> OSD DISPLAY:
Camera information is displayed.
Protocol and Baud rate are displayed according to the settings oft he DIP-switch
Firmware version and data upgrade are applied when running updates
DOME-SETUP -> INITIALIZATION:
Using this function, all saved data of “tour“, “preset“, “sector“, “privacy“ or “pattern“ are deleted.
Use the left/right arrows to delete saved data.
If you press
FOCUS -
and the curser is set to YES, saved data is deleted. After that, every
element such as “preset“, „sector“ etc blinks and appear for approx. 2-3 seconds on the
screen. Then the screen displays the previous page.
In order to delete the saved data and to reset to default settings, select LOAD OPTIMIZED
DEFAULT . The following page appears:
SYSTEM STATUS
PROTOCOL
: PELCO D, P
BAUD RATE
: 9600 BPS
FIRMWARE VER. : 2.01
UPGRADED DATE : 24.01.08
CAMERA MODULE : SDM100
[PREVIOUS PAGE]
Default setting
INITIALIZATION
[TOUR CLEAR]
[PRESET CLEAR]
[SECTOR CLEAR]
[PRIVACY CLEAR]
[PATTERN CLEAR]
[LOAD OPTIMIZED DEFAULT]
TOUR CLEAR
ARE YOU SURE? YES NO
TOUR CLEAR
