User manual SNC-670ID/W
_________________________________________________________________________________
- 12 -
1.7. External RS-485 connection
PTZ camera control can also be done by the RS-485 interface.
Please note the following: The DIP-switch SM10 is used for 100 Ohm. DIP-switch SW10 must
only be used for the last camera at the bus (even if only one camera is used).
1.8. Camera mounting
Mount the camera onto a solid surface which is capable to carry the weight of the camera. In
case the screws included in the delivery are not adequate, please make sure to use other
suitable screws to ensure a safe camera installation.
1. Fix the bracket to the desired location
using 4 screws.
2. If you use a tube cable channel, please
make sure to use the right size.
3. Assemble the camera.
Bus connection
Camera 1
Camera 2
Camera 3
Camera N
