User manual SNC-670ID/W
_________________________________________________________________________________
- 18 -
DOME-SETUP -> RECOVER:
The camera is able to return to those previous settings which were used before you operated
the camera manually (auto scan, group tour, preset, pattern or sectors).
After the set time, the camera goes into operation again in case it has been switched off. The
recovery time can vary between 15 – 99 seconds. The default setting is OFF.
DOME-SETUP -> MANUAL SPEED:
The manual pan/tilt speed can be set from 10°/sec to 200°/sec. The default setting is 100°/sec.
DOME-SETUP -> AUTO FLIP
Use the left/right arrows to turn the auto flip function on/off. The default setting for auto flip is
OFF
DOME-SETUP -> ZOOM SPEED:
Zoom speed can be set to FAST or SLOW. Use the left/right arrows to make the setting. The
default setting is FAST.
DOME-SETUP -> ALARM:
The alarm function is activated by switching-on the ENABLE mode. Use the left/right arrows to
make the setting. The default setting is DISABLE.
DOME-SETUP -> LANGUAGE:
English, Italian and Polish are available, plus some other languages. Use the left/right arrows
to make the setting. The default setting is ENGLISH.
DOME-SETUP -> SYSTEM LOCK:
Saved data is stored is protected by a password. Changes are only possible using the correct
password. Set the System Lock“ to ON to get to the password page. Use the left/right arrows
to make the settings. The default setting is OFF.
DOME SET
SYSTEM LOCK: : OFF
[PASS WORD]
[OSD DISPLAY]
[SYSTEM STATUS]
[INITIALIZATION]
[PREVIOUS PAGE]
Default setting
