User manual
SNC-211RSIA, SNC-311FSNF
_________________________________________________________________________________
- 11 -
1.4 Access
On the rear of camera SNC-211RSIA, there is a service lid. Screw it off to have access to the
reset button and the product label (serial number etc).
Press this button for a few seconds to reset the camera.
If you screw off the entire housing from the camera module, you will have access to the SD
card slot.
Here you can insert a micro SD card (not included in the deliver), e.g. to store snapshots.
(If you also use SANTEC network recorder SNVR-1412P or SNVR-1812P, you can use the
ANR (Automatic Network Reproduction) function.)
Reset button
Product label
Reset button
SD card slot
(max. 32 GB)
