Santa Fe 4032230, Инструкция по установке и эксплуатации

Страница: 9 / 16

9
1-800-533-7533 | www.Santa-Fe-Products.com Santa Fe Impact Installation & Operation Instructions
Operation
Humidity Control Adjustment
The humidity control is an adjustable switch that turns the dehumidifier on and off. It turns on when the relative humidity (RH)
rises to the dial set point. It turns off when the RH is within ±5% of the set point.
Approximate Humidity Levels Per Setting
“Drier” 35% to 45% Relative Humidity
“Normal” 45% to 55% Relative Humidity
(Recommended for most applications)
“Humid” 55% to 65% Relative Humidity
The dehumidifier will run continuously until the RH is reduced to
the humidity control dial setting. It is not recommended to set the
humidity control to “dry” in rooms under 65°; doing so will result
in long periods of ineffective dehumidifier run time.
To turn unit on, turn the humidity dial clockwise to the
recommended “NORMAL” position and set fan control to
“FAN AUTO.” To turn the unit off, turn the humidity dial
counter clockwise to the “OFF” position and set fan control
to “FAN AUTO.”
Defrost Cycle
This product includes a defrost thermostat. This feature prevents internal damage caused by excessive frost forming within
the unit. When the unit is experiencing excessive frost the system will stop dehumidfying and the fan will run until normal
operating conditions are present.
Fan Operation
Turning the fan switch “FAN ON” will cause the unit’s internal blower to run continuously, whether the unit is dehumidifying or
not. This function is desirable if the unit is used for air circulation or filtration. Turning the fan switch to “FAN AUTO” will cause
the unit’s internal blower to run only while the unit is dehumidifying.
The Acurite Hygrometer (part number 4029577) is available to accurately monitor humidity levels. Please contact
your dealer or order online.
4031882