This sheet lists important safeguard that will help to assure your enjoyment and
proper use of the HD-STB and accessory. Please read them carefully before
operating and using your HD-STB product.
1. Read and Retain these User's Guide
All the safety and User's Guide should be read before the HD-STB is operated.
Follow all User's Guide. The safety and User's Guide should be retained for future
reference. Comply with all warnings on the HD-STB and in the User's Guide.
2. Use Correct Power
This HD-STB should be operated only from the type of power source indicated on
the rear panel. If you are not sure of the type of power supply to your home,
please consult your HD-STB dealer or local electric company.
3. Install to Stable Place
Do not place this HD-STB an unstable cart, stand, tripod, bracket, or table. The
HD-STB may fall, causing serious injury to a child or adult as well as serious
damage to the HD-STB. Use this HD-STB product only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer or sold with the HD-STB
product. Any mounting of the product should followed the manufacturer's
instruction and use a mounting accessory to recommended by the manufacturer.
HD-STB and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the HD-STB and cart combination to
overturn.
4. Provide Antenna Ground
If an outside antenna or cable system is connected to the HD-STB, be sure the
antenna or cable system is grounded so as to provide some protection against
voltage surges and built-up static charges. An outside antenna system should not
be located in the vicinity or overhead power lines, other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching or
approaching such power lines or circuits as contact with them might be fatal,
Installing an outdoor antenna can be hazardous and should be left to a
professional antenna installer.
5. Provide Proper Ventilation
Slot and openings in the cabinet are provided for ventilation to ensure reliable
operation of the HD-STB and to protect it from overheating. These openings must
not be blocked or covered. This HD-STB should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided. For
sufficient ventilation, there must be at lease 10cm free air space above, behind
and on each side of the HD-STB.
6. Keep Away from Heat
Do not expose the HD-STB under the direct sunlight. The product should be
situated away from heat sources such as radiators, heat registers, stoves, or
other product (including amplifiers) that produce heat.
Important Safeguard
