background image

                 The lightning flash with arrowhead symbol within an equilateral triangle, 
                 is intended to alert the user to the presence of uninsulated " dangerous 
                 voltage" within the product's enclosure that may be of sufficient 
                 magnitude to constitute a risk of electric shock.

                 The exclamation point within an equilateral triangle is intended to alert 
                 the user to the presence of important operating and servicing instructions 
                 In the literature accompanying the appliance.
   

CAUTION:

 TO REDUCE THE RISK OF ELECTRIC SHOCK,

 DO NOT OPEN. 

NO USER-SERVICEABLE PARTS INSIDE.

 REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

 TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  

                   PLACE ANY OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES 
                   ON THE UNIT.

CAUTION:

 TO PREVENT ELECTRIC SHOCK, MATCH AC WALL MOUNTED 

                   SOCKET AND PRODUCT'S PLUG, FULLY INSERT.

CAUTION:

 CHANGE OR MODIFICATIONS NOT EXPRESSLY APPROVED BY 

                   THE MANUFACTURER COULD VOID THE USER'S AUTHORITY 
                   TO OPERATE THE EQUIPMENT.

CAUTION:

 TO PREVENT PERMANENT DAMAGE OF FLAT PANEL DISPLAY 

                  (PDP TV, PDP MONITOR, etc.), WHEN CHANNEL INFORMATION
                  DISPLAY WITH "Radio Broadcast" OR "Loss of Signal" LONG  
                  TIME, PLEASE TURN OFF THE TV SET.

Safety Information

Содержание STB-HD01















































Отзывы: