3. System Setup
From here you can setup the System Value of HD-STB. Also, you can restore the Factory
Reset value. The PIN Code is not changed even factory value restored.
Power Restore
This HD-STB has the Power Restore function. If you setup the Power Restore On
and when AC Power is applied, the HD-STB will automatic turn on and display
final memorized channel. It is useful for multiple display or exhibition for control
the HD-STB. After setup the Power Restore On, then just turn on the AC Power for
HD-STB On and Turn Off the AC Power for HD-STB Off.
The factory default value is Power Restore Off.
1) Press MENU button to display the menu.
Press UP or DOWN to select SYSTEM SETUP menu
ENTER or RIGHT to select the SYSTEM SETUP menu.
2) Press UP or DOWN to select the Power Restore menu.
Press ENTER or RIGHT to select the Power Restore.
3) Press UP or DOWN to select desired one.
4) Press EXIT to completion of Power Restore setting.
Auto Power Off
This HD-STB has the Auto Power Off function. You can setup the Auto Power Off
function on or off. After setup this function to on, if there is no aerial signal more
than 90 minutes, then HD-STB will automatic turn off for prevent unwanted
operation. If you setup to off, then this function is disable.
Menu Time Out
You can adjust OSD (On Screen Display) display time. If you feel display time is too
long or short, you can select time out period using Menu Time Out setup. If you set
to All, then the menu will not disappear automatically. At that time, you can press
EXIT to disappear the menu OSD.
OSD Transparency
You can adjust OSD (On Screen Display) transparency.
If you feel the menu display is too thick or thin, you can adjust the transparency of
OSD using OSD Transparency setup.
24
Using the MENU System
MENU
AV
/
S Y S T E M SETUP
Power Restore
Auto Power Off
Menu Time Out
OSD Transparency
Display Dimmer
TV Remote Cnt'l Code List
Factory Reset
System Version
Off
On
Off
Off
9 sec
80 %
Step1
Press ENTER or
to enter. Press
or
to move.
Press EXIT to exit. Press
to go back.