Step 6. Install Remote Control battery and TV Control Section
Code Setting
Install Remote Control battery. The battery has polarity so when insert the batteries,
make sure the "+" and " " terminals are oriented correctly.
Setting up the TV Control Section Code. After finished the TV Control Section Code
setting, the universal key of the HD-STB can control for your TV.
For TV Control Section Code setting, follow the following process.
1. Press and Hold TV POWER button.
2. Enter three digits TV Control Section Code.
3. Release the TV POWER button.
You can find the 3 digits code for your TV at the end of this User s Guide.
Please refer to the TV Control Section code setting.
Step 7. Check up the On Screen Display
For verify correct setting of Display Mode, you should check up the OSD from HDTV's
display screen.
Turn on the HD-STB and HDTV.
Press Menu button on the remote control, you should check up the OSD for verify A/V
connection. If you cannot find any OSD in your TV display, please check up again the
Display Mode switch position and A/V connection.
Step 8. Automatic Channel Search and Channel Change
Please processing the Automatic Channel Search and find possible channels.
Please make sure, you should wait until fully searched.
You can change channel using CH or CH button in your remote control.
Or you can direct select the channel using channel number.
Please make sure, the channel change operation is based on CH LIST in the internal
memory. If you edit, delete and move the memorized channel, you cannot access the
channel using CH or CH button or direct number enter. At that time, please perform
the Automatic CH Tuning or Manual CH Search for re-Scan the channel.
If you setting up the favorite Channel using Program Preference and Favorite CH in
the menu system, you can also change the channel using PR
, PR button for
Favorite Channel selection.
17
Getting Started