SanRex IA-3000TP-U3E, Руководство оператора

Страница: 13 / 98

13
SYMBOL
SOURCE OF
HAZARD
HAZARD HOW TO AVOID
Optical Radiation and
Arc Heat
Thermal
Establish a written policy
documenting general safety
requirements for the wearing of
contact lenses. Conduct an eye
hazard evaluation in the
workplace
Cuts, Scrapes, Heat,
Flames, Molten Metal,
Wet Gloves, Insulation
Failure
Mechanical,
Thermal,
Electrical
Gloves should be:
Dry and moisture resistant.
In good condition, no holes or
tears.
Flame resistant.
Electrically and thermally
insulated to suit the process.
Coating of Steel
Fumes and
Gases
Obtain the Material Safety Data
Sheets (MSDSs) for all materials
used. Read and understand the
specification for coating type
and coating weights. Find out
what hazardous materials are
present or might be given off by
the coating when it is exposed to
the arc of high temperatures
Reactive Force from
Tools,
Tool Jammed or Coming
Loose
Mechanical
Wear proper head, eye and hand
protection.
Use face shields, safety glasses,
and goggles as appropriate.
Inspect tools before use.
Never use a tool that is in poor
or faulty condition.
Keep all tools in good condition.
Engine-Driven
Generators, power source
Equipment
Health Hazard
Reduce the intensity of the
source.
Shield the source where
practical.
Use engineering control
methods, such as room
acoustics, to control noise.
Place Body Between
Welding Electrode and
Work Cables Electric &
Magnetic
Fields
Do not place your body between
the welding electrode and work
cables. Route cables on the same
side of your body.
Route the welding cables close
together. Secure them together
with tape or cable ties.